šŸ”„FREE SHIPPING on all orders over $200!šŸ“¦

Your Cart is Empty


Pour Foam - 2 Lb Density - 2 Gallon Kit

Urethane Pour Foam - US Coast Guard Rated FlotationĀ Foam

2 Gallon Kit Fills Roughly 8 Cubic Feet of Space

  • This two-part liquid, expanding rigid urethane foam is a closed cell, pourable foam, which will resist the absorption of water.
  • The densities shown refer to the weight per cubic foot of expanded foam (12" x 12" x 12").
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting.
  • This product can be poured in multiple layers with excellent bonding between layers.
  • All expansion rates and times given are temperature critical. Temperatures below 75 degrees F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75 to 80 degrees F or above.
  • Accurate measuring of these products is extremely critical.
  • Working time before foaming:Ā approx. 45 seconds
  • Time before full expansion:Ā approx. 5 minutes|
  • Mixing:Ā We recommend using a mixing paddle that fits on the end of a drill (1500 to 2000 rpm) for most consistent results and best expansion.
  • The lightweight foam is commonly used for filling voids, filling under decks and practically any other flotation or insulation application. Higher densities are used for architectural castings, support applications and has virtually an unlimited number of potential uses.

Customer Reviews

Based on 2 reviews
Brian Schell
Pour Foam

Great product containers damaged in shipping but not leaking

Kristoffer Haase
Pour foam is good.

Worked great. Mixed it a little longer than recommended and got better expansion. Could be a Wisconsin weather thing. Would recommend having an extra set of hands for the pour. You gotta move fast. Great product and fast shipping. Thanks TBN!!