Your Cart is Empty
OnTheFly Jackplates
OnTheFly Jackplate - Manual
$599.00 - $699.00
599 ENTRIES for Boat Giveaway 🎟️
- #1 EPropulsion Dealer in the USA
- "Lowest Price Guaranteed"
- Fast & Free Shipping over $200: In Stock - Ships in 2-3 Days In Stock & Ready to Ship In Stock - Ships in 2-3 Days - ETA 3-5 Business Days - ETA 2 Weeks - ETA 1 Month
- Questions? Call an EPropulsion Expert: 404-720-3975
- #1 HydroTurf Dealer in the USA
- Lowest Price Guaranteed
- Free Shipping Over $200: In Stock - Ships in 2-3 Days In Stock & Ready to Ship In Stock - Ships in 2-3 Days - ETA 3-5 Business Days - ETA 2 Weeks - ETA 1 Month
- Questions? Call a HydroTurf Expert: 404-720-3975
- Lowest Price Guaranteed
- Pre-Order Now - Arrives in
- The Only USA Authorized Distributor
- Free & Fast Insured Shipping Over $200
- Questions? Call an AutoBoat Expert: 404-720-3975
- Lowest Price Guaranteed
- Made to Order - Ships in 1 week
- Free Shipping over $200
- Questions? Call an Expert: 404-720-3975
- Lowest Price Guaranteed
- Out of Stock In Stock and Ready to Ship On Backorder - ETA 1-2 Weeks
- In Stock and Ready to Ship On Backorder - ETA 1-2 Weeks
- Free Shipping over $200
- Questions? Call an Expert: 404-720-3975
Fastest Manual Jackplate Out There...Adjusts On The Fly
*Limited Time! OnTheFly Manual Jackplate Assembly Bundle Add-on SAVES $60
-
Premium Installation Hardware Bundle Includes:
- 4x Stainless Steel Bolts (1/2" x 3-1/2" long)
- 4x Stainless Steel Lock Nuts (1/2")
- 8x Stainless Steel Flat Washers (1/2")
- OnTheFly Motor Clamp Spacers
- 3M Sealant
On The Fly Jack Plates are the fastest manual jack plates on the market. Our jack plates can be raised and lowered by a manual handle while on the water within seconds from top to bottom. The biggest benefit of our jack plate is TIME because every second counts out on the water! Cut your time adjusting your manual jack plate from 20 minutes to just seconds!
NEW Larger Gear Ratio with quicker & easier adjustment - The upgraded Manual Jack features a higher gear ratio for effortless motor lifting - increasing the speed and ease of motor adjustment.
- MAX RISE (travel): 5 1/2 inches of travel. Plus, depending on where you mount the jack you can get up to 7 3/4 inches of rise.
Sizes:
- Standard - For up to 30hp motors - 150 lb. weight limit (for motors without factory trim and tilt) 7" rise
- Large - For up to 50hp motors - 230 lb. weight limit (for all motors WITH factory trim and tilt)7.8" rise
- To View Electric Switch Operated Version CLICK HERE
INVENTORY STATUS:
Standard & Large Available In Stock - Ships out within 1-2 Days
• Our custom manual jack mounts inside the jack plate housing
• 3 year warranty on the jack plate housing
• 1 year warranty on the jack
• Pre-drilled for transom mounting
• Jack plate housing made in the USA
MAX RISE (travel): 5 1/2 inches of travel. Plus, depending on where you mount the jack you can get up to 8 inches of rise.
STANDARD JACK PLATE DIMENSIONS - Weight 23 lbs.
- Height – 10 1/2”
- Width (Transom Side) – 12 ½”
- Width (Motor Side) – 13 ¼”
- Set Back – 5” (total length from of transom side to the back of the motor slide)
- Motor Plate Height – 12 ½”
- Motor Mounting Plate (Inside Brackets) – 10 ¾”
LARGE JACK PLATE DIMENSIONS - Weight 30 lbs.
- Height – 10 1/2”
- Width (Transom Side) – 16 1/8”
- Width (Motor Side) – 17”
- Set Back – 5 1/4” (total length from of transom side to the back of the motor slide)
- Motor Plate Height – 13 3/4”
ACCESSORIES NOT INCLUDED: Transom mounting accessories are not included in purchase. On The Fly Jack Plates recommends
- 4 each ½”- 3 1/2” long bolts – stainless steel
- 4 each ½”- lock nuts – stainless steel
- 8 each 1/2’”-flat washers – stainless steel
- Motor Clamp Spacers
***PATENTED***
C
Solid Jack Plate ![Connor Cap review photo]()
Everything lined up perfectly on my 2018 to have to 50hp tiller. Shipping only took 4 days from order to my front door. Rolls up and down with no issue and looks good on the boat.
D
Worth every penny! Work's great picked up speed and was able to go places I couldn't get in before highly recommend it.
A
OnTheFly Jack Plate ![Anthony Herbert review photo]()
Worth every penny! I used their hardware kit and spacers to save me time. It was super easy to install and it works flawlessly. I maximized my engine height and got about 8 inches out of it which was needed because I’m running a long shaft jet pump engine.
C
It performed as
It performed as stated
D
Manual jackplate
This jack plate functions perfectly, couple things that are ehh with it like depending on what motor u have clearance can be weird and u might have to grind down some metal. And the pre-drilled holes didn’t line up with my metal transom but besides from small installation hiccups the jack plate works just as advertised. I have a 1544 g3 with a Yamaha 25hp tiller on it and my top speed went from 25 to 31. I can run in almost 10”-12” of water. And for getting up super shallow creeks where u can 8” of water I was able to idle up river with the jack plate. I would buy it again if I had the choice but would have got the electric one.
Make sure it works with ur motor and measure twice and cut once
v
Jack plate
Installed fairly easy.
Bolts lined up perfectly with no drilling.
A
Great design
Appreciate the tight clearances on the parts plus jackplate have a predrilled holes that were a great match to the standard outboard mount.
J
You need this!
Drought in Southwest, MI has the river levels dropping to some of their lowest level in years. I won't throw a ridiculous number that I can now run in 4" of water but I can say I was confidently running in under a foot of water with a lightweight 16' aluminum v-hull with a 25hp long shaft, power trim, tiller and lifting foil on the cav plate. (SE200) I'm 250# plus with no other mods to the boat. Full gas and battery in the stern. With help from a pulley and counterweight (genius move) I was able to lift the motor off the transom with minor effort and the jack plate bolted to the existing holes. Followed the instructions and was done in under two hours. Sea trial results were as expected. I lost a little top end speed due to the drag of the new lifting foil. I gained performance in the ability to run more shallow and I was not able to vent the prop under any circumstance. Cornering was crisp. Improve the shipping tape on the box and I'll give it 10/10.
B
Simple install. Functional jack plate
Purchased to access shallow water.
Improved motor height. Better adjustment. Trial run Friday. The installation was strsiforward with the hell of the instruction video from the manufacturer. Fast delivery from TBN
R
It works great. I wish the pucks had an indention in them so the clamp screw heads would counter sink on them and hold in place better.
C
Great jack plate, super easy to install.
M
Love it
I have a 25hp on it and I can run in 4in of water best money I have spent on my boat
J
OnTheFly Jackplate - Manual
B
On the fly jack plate
NICE!! Pretty straight forward and easy to install and operate
Z
Overall good product
I’ve recently bought the large manual on the fly jackplate. So far it has worked well for me. There is a little slop in the plate and it slightly concerns me but is working just fine. It has helped me motor in shallow waters duck hunting.
M
Jack plate
Great project, super easy setup
D
Love it!
I really like what the Jack plate is going to do for me. I think it is going to fix my issue with needing to push my motor back a bit and allow me to run skinny when needed. Just have not been able to mount yet. Had shoulder surgery and a mix of bad weather. Will get there soon though. I do think it is a well made product that is going to be a big asset to my smallish boat.
T
Love it
Love it
G
OnTheFly Jackplate - Manual
C
Well Engineered
The jack plate looks to be very well engineered. Will be a couple months before use, doubt I’ll have any cons to report.
T
OnTheFly Jackplate - Manual
D
It's perfect I haven't used it yet but it's mounted on my boat
B
Order Review
Great price, fast response, and fast shipping.
B
OnTheFly Jackplate - Manual
V
OTF Jack plate
Great
R
Great Product
It arrived sooner than expected and it looks great. This thing is built for abuse! I will only buy another if I get another boat or start building boats for others. I can’t wait to install this to my boat.
g
Works great
Mounted up nice. Just watch when installing motor that everything clears. My f25 Yamaha motor had the handle and handle limit tabs removed for the motor to sit down all the way on the jack plate. If jack tabs were 1/2 inch shorter in height it would have worked a lot better. Will probably upgrade to the electric conversion. Not easy to use while driving.
R
Very good thanks
C
OnTheFly Jackplate - Manual
J
Grizzly
Very impressed with On the Fly Jackplate, it’s installed just waiting on weather to break so can check it out. Unfortunately I’m dealing with a Service related injury that’s hindering me from getting on the water too. Once I’m able to I will reach out to give you an updated review.
Respectfully, Johnny