




















EPropulsion
The ePropulsion kLite 750 is a 1.5 HP equivalent, purpose-built electric kayak motor and electric outboard designed specifically for fishing kayaks and recreational kayaks. Unlike a conventional kayak trolling motor adapted from a larger boat, the kLite 750 combines a 500W continuous electric motor, up to 750W Boost power, and an integrated 378Wh lithium-ion battery into one compact, self-contained system. No separate battery box, long power cables, or unnecessary deck clutter.
With a lightweight design, shallow-water capability, kayak-specific stern mounting, and precise low-speed Fish Mode, the ePropulsion kLite 750 is designed for kayak anglers who want quiet, efficient electric propulsion without the weight and complexity of a traditional trolling motor setup.
See the kLite 750 alongside the larger kMax 2200 in our video review. This video covers both motors; the specifications on this page apply to the kLite 750.
Watch the comparison on YouTube · Read our full kLite 750 review

500W continuous power / 750W Boost for cruising and temporary high-power operation
Integrated 378Wh lithium-ion battery eliminates the need for a separate motor battery
14.3 lb motor and battery, with approximately 19.4 lb total system weight including the mount
Shallow-water operation to approximately 7 inches
Fish Mode (~0–200W) for slow trolling, fishing structure, positioning, and precise boat control
Go Mode (up to 500W) for efficient everyday cruising
Boost Mode (up to 750W) for temporary high-power operation
Soft-Lock reverse provides up to 300W of reverse power
The kLite 750 is more than a conventional trolling motor for a kayak. It was engineered specifically for the narrow, lightweight, shallow-water environment of a fishing kayak. The integrated battery keeps your deck cleaner and eliminates the need to carry a large external battery.
Fish Mode provides low-speed precision for slow trolling, holding position in light current, working weed edges, or maneuvering around structure without rushing through the strike zone. Soft-Lock reverse provides up to 300W of reverse thrust for backing out of tight areas and correcting your position without spinning the kayak.

The kLite 750 features an integrated 378Wh, 25.2V lithium-ion battery built directly into the motor housing. The battery is not removable for separate charging. The included 100–240V charger takes approximately 4 hours to charge from empty.
The motor cannot run directly from an external battery. The optional eLite/kLite Range Extension Kit allows a compatible 12V battery to charge the integrated battery at up to 100W while on the water.
Manufacturer test data on a Crescent Kayaks Lite Tackle 2. Actual performance varies with hull, load, wind, current, and battery state. Boost is temporary operation.

The kLite 750 can operate in approximately 7 inches of water, making it well suited to shallow flats, tidal areas, backwater creeks, and other skinny-water fishing environments. Motor height adjusts across a 10.9-inch range to accommodate different kayak hulls and water conditions.
The kLite 750 package includes the electric motor with integrated 378Wh battery, motor mount and hardware, 100–240V charger, cord cleat, motor-lift handle, track-mounted throttle and cables, color display with track hardware and sun shade, magnetic kill switch, and spare kill-switch magnet.
Optional accessories include the foot-control steering kit, throttle mounting plate, spare propeller, and eLite/kLite Range Extension Kit.
The ePropulsion kLite 750 electric outboard is designed for kayak anglers and recreational kayakers who want quiet, clean electric power without the bulk of a conventional trolling motor and separate battery. Its integrated battery, lightweight design, shallow-water capability, Fish Mode, and kayak-specific mounting make it especially useful for fishing flats, backwater creeks, tidal areas, and other shallow-water environments.
The ePropulsion kLite 750 provides a nominal continuous output of 500 W (rated at roughly 1.5 HP equivalent). It features a 750 W Boost Mode (Sport Mode) accessed by double-tapping the power button, delivering instant peak acceleration to cut through head currents or make fast runs across open water.
The kLite 750 uses a streamlined, all-in-one fin architecture where the 378 Wh (25.2V) lithium-ion battery is sealed directly inside the rudder-shaped housing. This "throw-and-go" design eliminates external battery boxes, loose deck wiring, and heavy hull rigging.
The entire assembly weighs under 20 lbs:
The lightweight design makes it easy to carry with one hand, transport, or swap between watercraft.
Runtime depends on your selected mode and hull displacement:
Looking for marathon sessions on the water? If you want to scale up your amp-hours with an external setup, check out the Epoch and PowerHouse 48V batteries in our online store—both are rugged, angler-approved third-party favorites.
Yes. While the integrated 378 Wh battery handles typical day trips and pond-hopping, you can expand your setup using an optional external battery cable or solar charger.
Connecting a compatible external pack or ePropulsion battery expands capacity up to 1,069 Wh, unlocking 7 to 8+ hours of cruising at 4 mph. If you are exploring third-party power options, we also carry and recommend external battery solutions from Epoch and PowerHouse batteries in our online store to keep you powered through all-day excursions.
The kLite 750 operates in water as shallow as 7 inches (18 cm). Its adjustable mounting track provides 10.9 inches (276 mm) of continuous vertical travel, letting you fine-tune prop depth from 7 inches down to 17.9 inches to match skinny flats, shallow rivers, or choppy lakes.
Yes. Because the motor housing is molded in an aerodynamic, hydrofoil rudder shape, it acts as a functional stern rudder, maintaining directional tracking and steering control even when the throttle is turned completely off or drifting.
The motor features a spring-tensioned Soft-Lock Reverse system that delivers up to 300 W of reverse power without popping out of the water. If the lower unit strikes an underwater stump or sandbar while moving forward, the bracket automatically swings up to prevent hull or transom damage.
The included mounting plate utilizes the industry-standard micro-power pole 4-bolt stern pattern found on most modern fishing kayaks (such as Bonafide, Crescent, Native, and Hobie via adapter plates). It connects directly to foot-control steering cables or toe-control foot braces for hands-free angling.
Using the included 100V–240V AC smart charger, the integrated battery charges from 0% to 100% in approximately 4 hours. An optional 12V DC vehicle charger is also available for on-the-road charging between fishing spots.
Yes. The motor, battery housing, and display are IP67 waterproof and built with marine-grade coatings and corrosion-resistant alloys suitable for both saltwater estuaries and freshwater lakes. A quick rinse with fresh water after marine use is all that is required.
To see real-world water testing and handling on fishing kayaks, watch the Tiny Boat Nation ePropulsion Kayak Motor Overview. This video highlights the kLite 750's all-in-one fin design, speed on standard kayaks, and rudder maneuverability directly from the ICAST on-the-water pond demonstrations.