




















EPropulsion
The ePropulsion kLite 750 is a 1.5 HP equivalent, purpose-built electric kayak motor and electric outboard designed specifically for fishing kayaks and recreational kayaks. Unlike a conventional kayak trolling motor adapted from a larger boat, the kLite 750 combines a 500W continuous electric motor, up to 750W Boost power, and an integrated 378Wh lithium-ion battery into one compact, self-contained system. No separate battery box, long power cables, or unnecessary deck clutter.
With a lightweight design, shallow-water capability, kayak-specific stern mounting, and precise low-speed Fish Mode, the ePropulsion kLite 750 is designed for kayak anglers who want quiet, efficient electric propulsion without the weight and complexity of a traditional trolling motor setup.
See the kLite 750 alongside the larger kMax 2200 in our video review. This video covers both motors; the specifications on this page apply to the kLite 750.
Watch the comparison on YouTube · Read our full kLite 750 review

500W continuous power / 750W Boost for cruising and temporary high-power operation
Integrated 378Wh lithium-ion battery eliminates the need for a separate motor battery
14.3 lb motor and battery, with approximately 19.4 lb total system weight including the mount
Shallow-water operation to approximately 7 inches
Fish Mode (~0–200W) for slow trolling, fishing structure, positioning, and precise boat control
Go Mode (up to 500W) for efficient everyday cruising
Boost Mode (up to 750W) for temporary high-power operation
Soft-Lock reverse provides up to 300W of reverse power
The kLite 750 is more than a conventional trolling motor for a kayak. It was engineered specifically for the narrow, lightweight, shallow-water environment of a fishing kayak. The integrated battery keeps your deck cleaner and eliminates the need to carry a large external battery.
Fish Mode provides low-speed precision for slow trolling, holding position in light current, working weed edges, or maneuvering around structure without rushing through the strike zone. Soft-Lock reverse provides up to 300W of reverse thrust for backing out of tight areas and correcting your position without spinning the kayak.

The kLite 750 features an integrated 378Wh, 25.2V lithium-ion battery built directly into the motor housing. The battery is not removable for separate charging. The included 100–240V charger takes approximately 4 hours to charge from empty.
The motor cannot run directly from an external battery. The optional eLite/kLite Range Extension Kit allows a compatible 12V battery to charge the integrated battery at up to 100W while on the water.
Manufacturer test data on a Crescent Kayaks Lite Tackle 2. Actual performance varies with hull, load, wind, current, and battery state. Boost is temporary operation.

The kLite 750 can operate in approximately 7 inches of water, making it well suited to shallow flats, tidal areas, backwater creeks, and other skinny-water fishing environments. Motor height adjusts across a 10.9-inch range to accommodate different kayak hulls and water conditions.
The kLite 750 package includes the electric motor with integrated 378Wh battery, motor mount and hardware, 100–240V charger, cord cleat, motor-lift handle, track-mounted throttle and cables, color display with track hardware and sun shade, magnetic kill switch, and spare kill-switch magnet.
Optional accessories include the foot-control steering kit, throttle mounting plate, spare propeller, and eLite/kLite Range Extension Kit.
The ePropulsion kLite 750 electric outboard is designed for kayak anglers and recreational kayakers who want quiet, clean electric power without the bulk of a conventional trolling motor and separate battery. Its integrated battery, lightweight design, shallow-water capability, Fish Mode, and kayak-specific mounting make it especially useful for fishing flats, backwater creeks, tidal areas, and other shallow-water environments.
The kLite 750 produces 500W continuous power in Go Mode and up to 750W for temporary Boost operation. TBN lists it in the 1.5 HP equivalent category for shopping comparisons; 500W continuous and 750W Boost are its electrical power specifications. Boost requires at least 50% battery charge and a normal operating temperature.
No. The kLite 750 includes an integrated 378Wh, 25.2V lithium-ion battery inside the motor housing. You do not need a separate battery for normal operation. The integrated battery is not removable for separate charging.
In ePropulsion testing on a Crescent Kayaks Lite Tackle 2, the integrated battery delivered approximately 48 minutes at 500W and 2 hours 48 minutes at 133W. Actual runtime depends on speed, kayak hull, total load, wind, current, and battery condition. These test results are examples, not guaranteed runtime.
ePropulsion recorded approximately 5.5 mph at 500W and 6 mph during temporary 750W Boost operation on a Crescent Kayaks Lite Tackle 2. Your kayak's speed will vary with hull design, weight, wind, current, and motor setup.
Charge the integrated battery using the included 100–240V charger. A full charge from empty takes approximately 4 hours. Follow the manufacturer's charging and storage instructions.
Yes, with the optional eLite/kLite Range Extension Kit and a compatible 12V battery, both sold separately. The kit charges the integrated battery at up to 100W while on the water. The external battery does not power the motor directly, so higher motor power can still draw down the internal battery.
The kLite 750 is designed for stern mounting and uses a standard four-bolt mounting pattern. Fit is not universal. Some kayaks require an adapter plate, backing, or a suitable bracket. Confirm your kayak's mounting points, stern structure, installation access, and weight capacity before ordering.
The motor with integrated battery weighs approximately 14.3 lb. The mount weighs approximately 5.1 lb, bringing the total system weight to approximately 19.4 lb.
The kLite 750 can operate in approximately 7 inches of water, depending on the kayak and setup. Its motor height adjusts through a 10.9-inch range. Set the propeller depth correctly and allow clearance for rocks, logs, and other obstacles.
The kLite 750 has Soft-Lock reverse with up to 300W of reverse power. It does not provide GPS anchor lock or automatic position holding. Fish Mode provides fine low-speed throttle control; the operator still controls the kayak's position.
The package includes the motor with integrated battery, motor mount and hardware, 100–240V charger, cord cleat, motor-lift handle, track-mounted throttle and cables, color display with track hardware and sun shade, magnetic kill switch, and spare kill-switch magnet. The foot-control steering kit and range-extension accessories are optional.
Read TBN's kLite 750 first-look review for mounting details, battery information, and photos. The kLite 750 versus kMax 2200 review includes the comparison video embedded above.